Interfill is an easy to sand, finishing filler that corrects minor surface defects before the final coat. Soft and easy to use, you can apply it using a trowl, filling. A light weight two pack low to medium density epoxy based filling and fairing material. Interfill is an easy to sand, finishing filler that corrects minor surface defects before the final coat. For use over Interfill , it can be applied using a trowel.
|Published (Last):||16 July 2010|
|PDF File Size:||19.35 Mb|
|ePub File Size:||10.87 Mb|
|Price:||Free* [*Free Regsitration Required]|
Matt Specific Gravity 0. Any person using the product without first making written enquiries as to the suitability of the product for interflil intended purpose does so at his own risk. Read the label safety section for Health and Safety Information. Description Downloads Part B.
Call us on Wash with Super Cleaner, rinse with fresh water and allow to dry. Recommended wet film thickness WFT per coat microns by trowel or palete knife.
Some Important Points Do not use unless mixed thoroughly with the curing agent at specified ratio. Do not apply more than recommended WFT at any one time. After 3 months the filler must then be re -sanded before overcoating.
Spread mix out on a board to avoid excess heat build up and to keep the working life as long as possible. Designed and developed by Aztek Company no: Inyerfill of remainders must be arranged for with local authorities. Email to a Friend. I cookie ci aiutano a fornire i nostri servizi. Mix the two components thoroughly to an even colour. You may also be interested in the following product s.
Interfill – Seaware – Wholesale Marine & Fastenings
International Interfill 833 Part B 5 Lt #458COL1126
Interfill may be overcoated with itself as soon as knterfill has cured enough not to be lifted during the screeding process. Utilizzando tali servizi, accetti l’utilizzo dei cookie da parte nostra. View Comparison Go to login page Close. Apply firmly in a spreading action.
Quick Overview Interfill is a technically advanced, easy sand Epoxy Finishing Fairing Compound for use over Interfill profiling filler to correct minor surface defects before application of finishing coats.
Interfill is a finishing filler, easy to sand for use over Interfill to correct minor imperfections before applying the finishing coats.
Vacuum clean for best results. This makes it easy to monitor film thickness and sand-through during the application procedure. The Interfill is coloured green to contrast with the Interfill Thinner International GTA for equipment cleaning only.
Interfill is a technically advanced, easy sand Epoxy Finishing Fairing Compound for use over Interfill profiling filler to correct 833 surface defects before application of finishing coats. Remove all sanding residue using a clean air line and sweeping with a clean brush or broom. Terms and Conditions Contact us. Login with Facebook Cannot login with Facebook.